Scenario Editor Header Dialog Error

[Jason Petho]

From the manual Page 91:

Dynamic Visibility:

Scenario designers can now set the preferred visibility on a per turn or by a series of turns. This is achieved by noting the turn sequence followed by the visibility. In the following example scenarios that is 10 turns long, turns 1-5 will have a visibility of 3, while turns 6-10 will have a visibility of 5.

1-5[3] 6-10[5]

NOTE: The space is important between the two sets of values. Otherwise no spaces (none within each value set)

There is no limit to the number of visibility changes the designer can set for the scenario.

Dynamic Day/Night:

Scenario designers can now set the preferred day or night on a per turn or by a series of turns. This is achieved by noting the turn sequence followed by the visibility. In the following example scenarios that is 10 turns long, turns 1-30 will have a day setting, while turns 31-50 will have a night setting.

1-30[d] 31-50[n]

NOTE: The space is important between the two sets of values. Otherwise no spaces (none within each value set)

You can have as many days and nights as you wish. It is important that the number of turns in both the visibility setting and day/night settings are the same.

Hope this helps
Jason Petho