Sending attached support BACK up the chain

[Gris]

Checked on line and read the manual, am I correct that if I want to send an attached support unit back to a higher HQ (in this case a construction battalion attached to an army back to Stavka) I have to use the 'pick new HQ' as per 5.4.25; assign new hq?  I know there use to be an X beside the unit when it was attached to a lower HQ, but not now.

Maybe, depends on how many you have attached. If you want to send all your support units higher for free, set the support level to zero. Have the higher HQs set to 5 or higher. I set Stakva to 9 till I get all the SU sorted and then I lock it. Just to make sure there is room to accept the units. Rule 7.6.3.2. Automatic Attachment of Support Units.

Construction units do not always move because there are minimum limits. So if you are at the minimum, you do have to manually reassign them. Rule 7.6.3.3. Construction and Engineer Permanent Support Levels.

Pro tip: After you manually move out the construction units you want reassigned, set the HQ to "LOCKED" or they will move right back and you will waste admin points.

See you on the Steppe!