Stalingrad Gold Don Bridges

[CheerfullyInsane]

That's because you didn't read the manual.

Page 52:

It is possible for Engineer units to attempt to damage a Full-Hex Bridge, but it involves a multi-step process:

1. In Travel Mode, the Engineer unit must first move onto the bridge.
2. In the next turn, the Engineer unit can use the Bridge Operations command to begin wiring the bridge for demolition.
3. When the Bridge Operations complete, the bridge is shown as WIRED in the Terrain Info Box indicating that it is wired for demolition.
4. At this point the Engineer unit can move off the bridge and occupy an adjacent hex. The Engineer unit should also change into Deployed Mode at this point.
5. At any subsequent turn, the Engineer can attempt to blow the bridge by using the Damage Bridge or AT Ditch command.

The program will determine the success or failure of this attempt using the standard bridge damage procedure and using the Heavy Bridge defense parameter value.
Once a Full-Hex Bridge has been damaged, it cannot be repaired.