Clearing rubble

[dukemat]

This is from the user manual concerning RUBBLE - rubble:

Page 38

Engineer units may attempt to clear the Rubble. Once cleared, Rubble still triples movement costs through the hex, but does allows road movement. Rubble that is not cleared is reported as "RUBBLE" in the Terrain Info Box while Rubble that is cleared is reported as "Rubble"

Page 84

Clearing Rubble

All Engineer units are capable of clearing Rubble hexes. The Engineer unit must first enter the Rubble hex and then, using the Clear Mines or Rubble option of the Engineer menu, toggle the Clearing Rubble operation. If there are also mines in the hex, then these must be cleared before the Rubble can be cleared. The probability that the rubble will be cleared in the hex is half the Digging-In Parameter Data value per turn.

When an Engineer clears a RUBBLE hex, it is designated a Rubble hex indicating that units in Travel Mode can use Road Movement through the hex. This represents the fact that the Engineer unit has clear lanes through the Rubble.

well aware of the RUBBLE rules..........I have read them many times.
WDS should take another look at RUBBLE rules and make it somewhat possible to clear the RUBBLE.