AP's for elevation changes question.

[Filthy-Missile]

Hi guys,

I need a little help. Can someone tell me how to account for the AP's used when going up or down on various hex-side elevation changes? Somehow I was unable to find this in the manual.

Thanks a lot,

Filthy "Dan" Missile!!!

[XLVIII Pz. Korp]

Good question my friend and I'll give you the only answer I have, unsatisfactory as it is.

The good news is if you select a unit, hit F2 to bring up the info box you will see in the second column under HEXSIDE the additional cost for a unit to move up elevation, and/or any other hexside.

The bad news though is my expreience has taught me this info is not always accurate. I believe these are baseline costs that are modified by the ground condition i.e. it costs the base plus a bit more to cross an elevation hexside in mud or snow conditions.

Hope that helps

[deli59]

the cost in ap mentioned in UNITS DATA (F2) is for 25m elevation change, so you have to make modifications for your current scenario,depenting on the current scenario elevation differencial

I have noticed that in matrix edition ,this cost does not exit at all,any more
I hope that i helped

sorry for my english